Heavy Duty / Material Lift

Heavy Duty / Material Lift: 750-2500 Pounds

heavy_duty_photo

STANDARD FEATURES

  • Lift distance up to 50 feet
  • Standard speed 40 feet/minute
  • Floor level loading
  • Two loading configurations – single side or opposite sides
  • Equally suited for light or heavy loads
  • Appropriate for occasional duty or continuous duty
  • Elevator type precision guide rails
  • Manually operated vertical bi-parting, slide up, and swing type UL fire rated entrances
  • Architectural grade stainless steel or primed finishes
  • Commercial grade construction throughout
  • Performance proven drive systems to match your application requirements
  • UL approved microprocessor control systems
  • Equipment complies with all National Code requirements
  • Low cost installation
  • Minimum maintenance requirements

OPTIONAL FEATURES

  • Higher speeds and lifting distances available upon request
  • Power operated doors and gates:
    • Can be motorized so that they can automatically open and close
  • Variable frequency and vector based drive systems
  • Security systems:
    • Key locks
    • Keypads
    • Interfaces to external security systems

SUGGESTED CAR SIZES: HEAVY DUTY MATERIAL LIFT

Custom car sizes are available at no extra charge.

Standard Inside Dimensions (Inches)
Car SizeWidthDepthHeight
L364860
M484860
N486072
O487272
P488484
Q489696
R606060
S607272
T608484
U609696

The maximum width of a Type A Material Lift is 4′-0″ (48 inches) wide.
The maximum height of a Type A Material Lift is 7′-6″ (90 inches) tall.
A Vertical Reciprocating Conveyor (VRC) has NO size limitations.

For smaller standard car sizes please visit:
LIGHT DUTY DUMBWAITER for up to 24″ wide x 24″ deep x 36″ high.
MEDIUM DUTY DUMBWAITER unit for up to 38″ wide x 38″ deep x 48″ high.

Download Masterspec

Space Requirements for Standard Rise, Standard Speed and Drum Units

Floor Loading
Intended for loading material with a cart or at floor level.

heavy_stand_floor

heavy_stand_single

Single Opening:

All openings face the same direction.

Download Drawings:

Internet Explorer users will need to right click and save target as for all DWG file links.

30-48” wide x 30-96” deep x 36-78” high car:

Floor Loading w/Standard 40” Pit
Floor Loading w/Min. 16” Pit

48” wide x 72” deep x 78” high car:

Floor Loading w/Standard 36” Pit
Floor Loading w/Min. 16” Pit

heavy_stand_opp

Opposite Opening:

Front and rear openings.

Download Drawings:

Internet Explorer users will need to right click and save target as for all DWG file links.

30-48” wide x 30-96” deep x 36-78” high car:

Floor Loading w/Standard 40” Pit
Floor Loading w/Min. 16” Pit

48” wide x 72” deep x 78” high car:

Floor Loading w/Standard 36” Pit
Floor Loading w/Min. 16” Pit

* NOTE: If a collapsible gate is required the right OR left dimension must increase as indicated below; consistent with the hinge side of the swing doors.

  • Car widths 24″-30″: Door hinge side dimension must increase to 8″.
  • Car widths 31″-36″: Door hinge side dimension must increase to 9″.
  • Car widths 37″-42″: Door hinge side dimension must increase to 11″.
  • Car widths 43″-60″ (MAX): Door hinge side dimension must increase to 12″.

Space Requirements for High Rise (over 60'), High Speed (over 75 fpm) and Traction Units

Floor Loading
Intended for loading material with a cart or at floor level.

heavy_track_floor

heavy_track_single

Single Opening:

All openings face the same direction.

Download Drawings:

Internet Explorer users will need to right click and save target as for all DWG file links.

30-48” wide x 30-96” deep x 36-78” high car:

Floor Loading w/Standard 30” Pit
Floor Loading w/Min. 16” Pit

heavy_track_opp

Opposite Opening:

Front and rear openings.

Download Drawings

Internet Explorer users will need to right click and save target as for all DWG file links.

30-48” wide x 30-96” deep x 36-78” high car:

Floor Loading w/Standard 30” Pit
Floor Loading w/Min. 16” Pit


Industries
What do you want to lift today?

Matot serves a broad range of industries with our extensive product line. We have varying types of dumbwaiters for all industries to serve all your needs.

Learn More

Planning Center
Request a drawing or quote

With the most sophisticated design outputs in the business we can get you the drawings, specs and budgets you need to secure your project and keep it moving ahead. Our Planning Center has everything from basic information to final drawings.

Learn More

Our Products
Think inside the box

Thinking Inside the Box means determining the best product for your project. Determine what you need to lift, the size of the materials, available space and where the contents need to go.

Learn More

Our Brochures
Solutions that save time & money

Our goal is to deliver real benefits to our clients. We have a range of case studies that demonstrate how Matot dumbwaiters can not only save time, space and money, but also enhance safety and deliver a range of efficiencies.

Learn More